Jump to content
Conéctate para seguir esto  
stratojet

Post de noticias de DCS SimpleRadio Standalone

Publicaciones recomendadas

DonAdams.jpg.e71d7fdb22e06200bf263ffeecc3ca93.jpg

[11/07/2020]: Versión 1.9.0.2

  • Added Patreon
  • Added silent update and install flags e.g. .\SRS-AutoUpdater.exe -beta -server -path="C:\Program Files\DCS SimpleRadio Standalone" -restart
  • AutoConnect LUAbug fix - @MorpheusXAUT
  • Fresnel fix @132nd-etcher
  • Changed autoupdater to ask about viewing release notes
  • Changed the installer - when started from the autoupdater - to ask the user if they want to make changes
  • Increased Fresnel effect / line of sight offset
  • Improvement to Server Sync
  • Added new option to opt out of autoconnect entirely

>>> Descargar esta update desde aquí

 

[19/06/2020]: Versión 1.9.0.1

  • Added support for re-transmission / relay for GCI / AWACS. Incoming broadcasts can be forwarded on if the server has enabled it.
  • New microphone audio pipeline - switched to WASAPI and should improve latency and compatibility with all sound cards. NOTE! You will need to re-select the correct microphone
  • Further fixes for server memory usage
  • Fix for SRS autolaunch due to ED change. Thank you to ED for the support with solving this issue!
  • Addition of Retransmit (using the SRS Overlay) to the Gazelle

>>> Descargar esta update desde aquí

 

[30/05/2020]: Versión 1.8.0.6

Changelog

  • Added support for P47

>>> Descargar esta update desde aquí

 

[03/06/2020]: Versión 1.8.0.5

Changelog

  • Added MIDS TX start & end tone
  • Added VoIP Reconnect - if no VoIP pings are received within 40 seconds, attempts to reconnect UDP VoIP
  • Fixed MIDS volume
  • Changed F16 volume to only come from the main volume knob
  • Fix for server memory leak (JSON serialising colour - ended badly) - make sure to update the server and reboot the machine to completely fix the issue
  • Fix for F16 cold start showing no radio until power applied
  • Added Server side & Client side option for showing the transmitter on the overlays
  • Added "Compact Mode" setting for the DCS ingame SRS overlay. When enabled the frequency will be replaced by the transmitter name - rather than appended. Saving space
  • Added Balance Slider for radio audio - allows more than just LEFT, BOTH. RIGHT

>>> Descargar esta update desde aquí

 

[21/05/2020]: Versión 1.8.0.4

Changelog

  • Better error handling on server startup - warned if server port in use
  • Bug fixes for the Installer
  • Fix for hang on disconnect on Servers - servers would also show a silly number of connected clients. Servers should upgrade to this version!
  • Add F-16 Guard to UHF on DED - backup also functional
  • Add HAVEQUICK to F5E UHF radio
  • Add radio power switches in UH-1H
  • Removed duplex from MIDS - turns out it isnt full duplex!
  • Fixed F5 Volume going over 100%

>>> Descargar esta update desde aquí

 

[10/05/2020]: Versión 1.8.0.3

Changelog

  • KY-58 for Harrier using the UFC
  • HAVEQUICK for A10C
  • Possible fix for disconnects some are experiencing (upgrade server & client for this)
  • Added Modules Capabilities Window on the Radio Overlay - hit the ? on the Overlay
  • Changed A10C to enable DCS Keybinds - override with Always Allow SRS Hotkeys
  • Improved Radio Server Sync
  • Added Connected Client List to Client window
  • Added MIDS tone and appropriate setting if you want to disable (thanks for the help!)
  • Removed Distance / Line of Sight Volume reduction for MIDS (Digital Radio so wouldn't occur)

>>> Descargar esta update desde aquí

 

[02/05/2020]: Versión 1.8.0.2

Changelog

  • Hotfix - Add Tuned Client Count for MIDS
  • Hotfix - Fix coalition not being sent in GCI / JTAC Slot
  • Hotfix - Fix AWACS panel not letting you tune non cockpit radios
  • TCP Network Protocol changes to reduce chattiness - NOT BACKWARDS COMPATIBLE
  • UPNP on by default for the SRS Server - automatically opens the correct ports with a compatible router. Disable this in the server.cfg
  • MIDS Radio support for the Hornet - pick any other channel than 127 to enable it
  • Support for a fourth radio on the SRS overlay and DCS overlay
  • Added new features for JF17 thanks to Uboats / Deka unlocked by a later DCS patch
  • Added final fix for intercom latency over increasing over a long period
  • Fix for F14 Transponder - if there is a RIO, SRS will send LotATC the RIOs transponder settings

>>> Descargar esta update desde aquí

 

[13/04/2020]: Versión 1.7.8.1

Changelog

  • Fix for Output Device not saving in 1.7.8.0

>>> Descargar esta update desde aquí

 

[11/04/2020]: Versión 1.7.8.0

Changelog

  • SRS DCS options can be changed while flying - thanks to @rthom91
  • NLog configuration file can now be used thanks to @rurounijones
  • Lots and lots of refactoring and under the hood changes thanks to @rurounijones
  • Fix for the Yak Radio
  • Fix for installer not always detecting DCS if the Steam version is used
  • Added experimental UFC controls for FA18 and Harrier Guard
  • Added possible fix for the memory leak some see on their server - in testing it seems much improved!
  • Added option to the AutoConnect LUA to automatically figure out the public IP - see the AutoConnect LUA to enable the setting
  • Removed Hornet MIDS volumes affecting Radio 1 & 2 Volume settings
  • Added option to set the LotATC server IP for the transponder export along with the existing port setting

>>> Descargar esta update desde aquí

 

 

[29/02/2020]: Versión 1.7.7.0

Changelog

  • Fix Transponder export if player has no Transponder - update servers for this change
  • Fix M2000C to only have valid transponder codes - Mobot-gh
  • Disable channels tab on overlay when it cant be used with the aircraft
  • Disabled encryption tab on overlay when it cant be used with the aircraft

>>> Descargar esta update desde aquí

 

[22/02/2020]: Versión 1.7.6.0

Changelog

  • Added F-16 Transponder Panel
  • Added F-14 Transponder Panel - Gyrovague
  • Added override option to always allow Overlay Transponder controls
  • Switched Co-ordinates for distance calculations and Line of Sight - Fixes bugs with LotATC & Aircraft line of sight
  • Added UH1 Intercom
  • Added Height offset to LotATC position to simulate tower
  • Added position of Camera in DCS as player position if no aircraft is used and LotATC position isnt used - Means Distance and Line of sight work with CA or in GCI slot
  • Fixes for Line of Sight and Distance in mixed environment - LotATC & Aircraft

>>> Descargar esta update desde aquí

 

[16/02/2020]: Versión 1.7.5.0

Changelog

  • Added cockpit transponder controls for: A10C, UH1, C101EB, C101CC, F5E, M2000C
  • Added Chat Commands - see Discord for details
  • Added Ident Mic switch support. Setting a transponder to Mic and transmitting on UHF will cause the transponder to enter IDENT mode and flash the aircraft on LotATC

>>> Descargar esta update desde aquí

 

[09/02/2020]: Versión 1.7.4.0

Incluiso soporte para transponders bajo LotATC (en breve).

Changelog

  • Reverted changes to input handling
  • Added new Transponder panel to the DCS & SRS Overlay for use with LotATC soon
  • Transponder integrated for UH1 and A10C as a test - all other currently use overlay
  • Changes to make the DCS scripts install optional in the installer - for Server only installs or if you want to use SRS without DCS installed
  • Fix for simultaneous transmission panel for AWACS / GCI

>>> Descargar esta update desde aquí

 

Compartir este mensaje


Enlace al mensaje
Compartir en otros sitios web

Acaba de salir la versión 1.5.0.0 con muchos cambios muy importantes. Es obligatorio su instalación ya que servidor oficial SR de La Fundación, va a pasar a emplear esta versión.

Toca volver a configurar todos los parámetros, tomar nota de los que tenéis en vuestro cliente antes de actualizar. Se supone que esta versión elimina los problemas de volumen con el micro (saturación o baja señal), gracias al empleo del AGC.

Compartir este mensaje


Enlace al mensaje
Compartir en otros sitios web

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Responder a este tema...

×   Pegar como texto enriquecido.   Restaurar formato

  Only 75 emoji are allowed.

×   Tu enlace se ha incrustado automáticamente..   Mostrar como un enlace en su lugar

×   Se ha restaurado el contenido anterior.   Limpiar editor

×   No se pueden pegar imágenes directamente. Carga o inserta imágenes desde la URL.

Conéctate para seguir esto  

×
×
  • Crear nuevo...